Wireless Commissioning Tool for Fixture Mount Sensors
FSIR-100
Wattstopper
Bazaarvoice SAP Hybris Integration Version 2.8.1
The FSIR-100 Wireless IR Configuration Tool is a handheld tool for remote configuration of IR-enabled fixture integrated sensors. The tool enables device modifications via pushbutton, without ladders or tools, and stores up to six sensor parameter profiles to speed configuration of multiple sensors.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Enables fast ladder-free setup and maintenance
- Easy-to-read OLED screen
- Allows precise configuration with greater granularity than dip switches or trimpots
- 2-way IR communication for data upload, download, confirmation and storage
- Easy-to-use navigation pad
- Configures IR-enabled fixture sensors including selected HBP and FSP models
Specifications
General Info
Product Line | Wattstopper | ||
UPC Number | 754182931224 | ||
Country Of Origin | China | ||
Warranty Type | 5-Year |
Dimensions
Product Width US | 5.0 in | ||
Product Weight US | 0.5 lb | ||
Product Volume US | 32.55 cu in | ||
Product Depth US | 3.15 in | ||
Product Height US | 1.81 in |
Additional Information
RoHS Conformant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. | |
DesignLights Consortium Qualified System | Yes | ||
Security | Yes | This product is ioXt certified |
Technical Information
Sensing Range | Up to 32 ft |
Resources
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Also, in order to dim the lights, do I need a dimmer switch installed to the wall?
Hi,
You can set the fixtured to a fixed dim level by setting the high level to 5(50%) and the low level to 4.8%(48%) Please refer to the user guide available on the product page or reach out to tech support for more assistance.
Legrand Technical Support:
Phone: 1 800-879-8585, Option 3 then Option 1
Mon - Fri: 7am - 7pm CST (excluding holidays)
Date published: 2024-04-08
Where can I find information and training on how to dim our lights with the Wireless Commissioning Tool for Fixture Mount Sensors?
Hi,
Please refer to the user guide available for download on the product page or reach out to tech support for more assistance.
Legrand Technical Support:
Phone: 1 800-879-8585, Option 3 then Option 1
Mon - Fri: 7am - 7pm CST (excluding holidays)
Date published: 2024-04-08
can sensor be programmed so fixture comes on full bright during motion under daylight, but during motion at night it comes on dimmed?
Hi JJ,
Sorry, no you cannot set different dimming values for day/night.
Thanks,
Date published: 2024-03-27
Hello, will this remote work with the Cree FSP-2X1 sensor?
Yes it will.
Date published: 2024-02-21
Is it possible to completely disable the controls where the fixture will just stay active at all times ?
Hi William,
Yes, if you use the settings below and that will hold the fixtures on at full brightness.
Please reach out to our tech. support team for further assistance if required.
Legrand Technical Support:
Phone: 1 800-879-8585, Option 3 then Option 1
Mon - Fri: 7am - 7pm CST (excluding holidays)
Date published: 2024-01-19
I have a set point 4 and photocell 1. The lights turn off during the day. At night the lights only turn on when motion is detected. What setting do I need to keep lights on all night to low level, then switch to high level when motion is detected
Hello Shaun,
Please see a common FSP profile with settings below to accomplish the requested
High/Low/Photocell
Hmode: 10v
Lmode: 1v=10% light output, end-users choice of low mode
Tdelay: 10min
Cut off: DIS
Setpoint: DIS
Fade up: DIS
Fade down: DIS
Photocell: 30FC
Date published: 2023-11-07
Can you use the remote to program fixtures in a group or do they need to be individually adjusted
Hi Kevin,
Each fixture communicates directly with the remote so each fixture will have to be individually adjusted. The remote does allow you to save common setups for ease of recall and future use if required.
Date published: 2023-03-07
Can't get remote to work
I suggest calling 1-800-879-8585 Option 1 for Technical Support. We can discuss what may be going on with the remote and different setup recommendations.
Date published: 2022-05-31
Bazaarvoice SAP Hybris Integration Version 2.8.1